Show Filters
Part H Drainage

Standards and Publications

Share
Print
Standards referred to:
I.S. 6: 2004 Concrete sewer pipes
I.S. 166: 1972 Concrete surface water pipes
I.S. 262: 1984 Grey iron and ductile iron pipe fittings
I.S. 420: 2004 Pre-cast concrete manholes
I.S. EN 124: 2015 Parts 1-6 Gulley tops and manhole tops for vehicular and pedestrian areas 
I.S. EN 197-1: 2011 Cement - Part 1: Composition, specifications and conformity criteria for common cements;
I.S. EN 206: 2013+NA 2015 Concrete - Specification, performance, production and conformity
I.S. EN 274 (1-3): 2002 Specification for plastics waste traps AMD 3206; AMD 4191; AMD 4692
 I.S. EN 295-1: 2013 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 1: Requirements
I.S. EN 295-2: 2013 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 2: Quality control and sampling
I.S. EN 295-3: 2012 Vitrified clay pipes and fittings and pipe joints for drains and sewers - Part 3: Test methods
I.S. EN 588-1: 1997 Fibre-cement pipes for sewers and drains - Part 1: Pipes, joints and fittings for gravity systems
I.S. EN 598: 2007 Ductile iron pipes, fittings, accessories and their joints for sewerage
 applications 
I.S. EN 752: 2008 Drain and sewer systems outside buildings
I.S. EN 771-1: 2011 Specification for masonry units - Part 1: Clay masonry units
I.S. EN 771-3: 2011 Specification for masonry units - Part 3: Aggregate concrete masonry units
 (dense and lightweight aggregates)
I.S. EN 877: 2000 Cast iron pipes and fittings, their joints and accessories for the evacuation of
 water from buildings - Requirements, test methods and quality assurance
I.S. EN 1057: 2006/A1: 2010 Copper and copper alloys - Seamless, round copper tubes for
 water and gas in sanitary and heating applications.
I.S. EN 1091: 1997 Vacuum drainage and sewerage systems outside buildings
I.S. EN 1254-2: 1998 Copper and copper alloys – Plumbing fittings - Part 2: Fittings with
 compression ends for use with copper tube
I.S. EN 1254-3: 1998 Copper and copper alloys – Plumbing fittings - Part 3: Fittings with
 compression ends for use with plastic pipes
I.S. EN 1295-1: 1998 Structural design of buried pipelines under various conditions of loading -
 Part 1: General requirements
I.S. EN 1329-1: 2014 Plastic piping systems for soil and waste discharge (low & high
 temperature) within the building structure - Unplasticized poly(vinyl Chloride) (PVC-U)
I.S. EN 1401-1: 2009 Plastic piping systems for non-pressure underground drainage and
 sewerage – Unplasticized Poly(vinyl Chloride) (PVC-u) Part 1 Specification for pipes, fittings
 and the system
I.S. EN 1451-1: 1999 Specification for polypropylene waste pipe and fittings (external diameter 34.6 mm, 41.0 mm and 54.1 mm) AMD 3588; AMD 4438
I.S. EN 1455-1: 1999 Plastic piping systems for soil and waste within the building structure
I.S. EN 1519-1: 1999 Plastics piping systems for soil and waste discharge (low and high
 temperature) within the building structure - Polyethylene (PE) - Specifications for pipes, fittings and the system
I.S. EN 1565-1: 1999 Specification for thermoplastics waste pipe and fittings
I.S. EN 1566-1: 1999 Plastic piping systems for soil and waste discharge (low & high
 temperature) within the building structure - Chlorinated poly(vinyl Chloride) (PVC-C)
I.S. EN 1610: 2015 Construction and testing of drains and sewers
I.S. EN 1717: 2000 Protection against pollution of potable water in water installations and
 general requirements of devices to prevent pollution by backflow
I.S. EN 1825-1: 2004 Grease Separators - Part 1: Principles of design, performance and testing,
 marking and quality control
I.S. EN 1825-2: 2002 Grease Separators - Part 2: Selection of nominal size, installation,
 operation and maintenance
I.S. EN 1852-1: 2009 Plastic piping systems for non-pressure underground drainage and
 sewerage - Polypropylene (PP) - Part 1: Specifications for pipes, fittings and the system
I.S. EN 1916: 2002 Specification for unreinforced and reinforced pipes and fittings with flexible
 joints AMD 6269; AMD 7588
I.S. EN 1917: 2002 Concrete manholes and inspection chambers - unreinforced, steel fibre and reinforced
I.S. EN 2782-11: 1997 Specification for general requirements for dimension and pressure
 ratings for pipe of thermoplastics materials
I.S. EN 12050-1: 2015 Wastewater lifting plants for buildings and sites - Part1: Lifting plants for wastewater containing faecal matter
I.S. EN 12050-2: 2015 Wastewater lifting plants for buildings and sites - Part 2: Lifting plants for
 faecal-free wastewater
I.S. EN 12050-3: 2015 Wastewater lifting plants for buildings and sites - Part 3: Lifting plants for
 wastewater containing faecal matter for limited applications
I.S. EN 12050-4: 2015 Wastewater lifting plants for buildings and sites - Part 4: Non-return
 valves for faecal-free wastewater and wastewater containing faecal matter
I.S. EN 12056-1: 2000 Gravity drainage systems inside buildings - Part 1: General and
 performance requirements
I.S. EN 12056-2: 2000 Gravity drainage systems inside buildings - Part 2: Sanitary pipework,
 layout and calculation
I.S. EN 12056-3: 2000 Gravity drainage systems inside buildings - Part 3: Roof drainage, layout
 and calculation
I.S. EN 12056-4: 2000 Gravity drainage systems inside buildings – Part 4: Wastewater lifting
 plants – layout and calculation
I.S. EN 12109: 1999 Vacuum drainage systems inside buildings
I.S. EN 12201 Plastics piping systems for water supply, and for drainage and sewerage under
 pressure — Polyethylene (PE)
I.S. EN 12380: 2002 Air admittance valves for drainage systems - Requirements, test methods
 and evaluation of conformity
I.S. EN 12566-1: 2000/A1: 2004 Prefabricated septic tanks
I.S. CEN/TR 12566-2: 2005 Soil infiltration systems
I.S. EN 12566-3: 2005/A1: 2009 Packaged and / or site assembled domestic wastewater
 treatment plants
I.S. EN 12566-4: 2007 Septic tanks assembled in-situ from prefabricated kits
I.S. EN 12566-6 2013 Prefabricated treatment units for septic tank effluent
I.S. EN 12566-7 2013 Prefabricated tertiary treatment units
I.S. EN 12620: 2002/A1: 2008 Aggregates for concrete
I.S. EN 13076: 2003 Devices to prevent pollution by backflow of potable water - unrestricted air
 gap
I.S. EN 13077: 2008 Devices to prevent pollution by backflow of potable water - Air gap with
 non-circular overflow
I.S. EN 13476: 2007 Plastic piping systems for non-pressure underground drainage and
 sewerage - Structured wall piping system for unplasticized polyvinyl chloride (PVC-U),
 polypropylene (PP) and polyethylene (PE)
I.S. EN 13564: 2002 Anti-flooding devices for buildings - Part 1: Requirements
I.S. EN 13598-1: 2010 Plastic piping systems for non-pressure underground drainage and
 sewerage - Unplasticized Polyvinyl chloride (PVC-U), Polypropylene (PP) and Polyethylene
 (PE)-Part 1: Specification for ancillary fittings including shallow inspection chambers
I.S. EN 14396: 2004 Fixed ladders for manholes
 SR CEN TR 12566-5: 2008 Pre-treated effluent filtration systems
SR 66: 2015 Standard recommendation providing guidance to wastewater treatment products in
 compliance with the EN 12566 series of standards
BS 65: 1991 Specification for vitrified clay pipes, fittings and ducts, also flexible mechanical
 joints for use solely with surface water pipes and fittings AMD 8622: 1995
BS 416-1:1990 Discharge and ventilating pipes and fittings, sandcast or spun in cast iron - Part
 1: Specification for spigot and socket systems
BS 437: 2008 Specification for cast iron spigot and socket drain pipes and fittings AMD 5877
BS 1710: 2014 Specification for identification of pipelines and services
BS 3868: 1995 Specification for prefabricated drainage stack units: galvanized steel
BS 4514: 2001 Specification for unplasticized PVC soil and ventilating pipes, fittings and
 accessories AMD 4517; AMD 5584
BS 4660: 2000 Specification for unplasticized polyvinyl chloride (PVC-U) pipes and plastics
 fittings of nominal sizes 110 and 160 for below ground drainage and sewerage
BS 5255: 1989 Thermoplastic waste pipes and fittings
BS 5911-4 : 2002 +A2 2010: Precast concrete pipes, fittings and ancillary products Specification for inspection chambers
BS 5911- 1: 2002 +A1 2010 Precast concrete pipes, fittings and ancillary products
BS 5911-3 :2010 +A1 2014 Precast concrete pipes, fittings and ancillary products
BS 5911-5: 2004 +A1 2010 Precast concrete pipes, fittings and ancillary products -Specification for prestressed non-pressure pipes and fittings with flexible joints
BS 5911-6:2004+A1:2010 Concrete pipes and ancillary concrete products. Specification for
 road gullies and gully cover slabs
BS 6297: 2007 + A1: 2008 Code of practice for the design and installation of drainage fields for
 use in wastewater treatment
BS 8490: 2007 Guide to siphonic roof drainage systems
BS 8515: 2009 + A1: 2013 Rainwater harvesting systems - Code of Practice
BS 8525-1: 2010 Greywater systems - Code of Practice
BS 8525-2: 2011 Greywater systems – Domestic greywater treatment equipment – Requirements and test methods
BS ISO 4065: 1996 Thermoplastic pipes, universal wall thickness table
BS ISO 11922-1: 1997 Thermoplastic pipes for the conveyance of fluids
Publications referred to:
EPA Code of Practice; 2009 Wastewater treatment and disposal systems serving single houses
EPA Wastewater treatment manual - Treatment systems for small communities, business, leisure centres and hotels: 1999
BRE Digest 365 Soakaway design
BSRIA Water Reclamation Guidance TN 6-2002 Design and construction of systems using
 Greywater
BSRIA Water Reclamation Standard TN 7-2002 Laboratory testing of systems using Greywater
CIBSE Knowledge Series “Reclaimed Water”
CIRIA Project Report 80 “Rainwater and greywater use in buildings: Decision making for water conservation“
Heating and Domestic Hot Water Systems - Achieving compliance with Part L 2008
Integrated Constructed Wetlands-Guidance Document for Farmyard Soiled Water and Domestic Wastewater Applications 2010
Local Government (Water Pollution) Act 1977 (No. 1 of 1977)
Local Government (Sanitary Services) Act 1948 (No. 3 of 1948)
Local Government (Sanitary Services) Acts 1878 - 1964
Other Standards and Publications
Council Directive 80/68/EEC of 17 December 1979 on the protection of groundwater against
 pollution caused by certain dangerous substances
SR 16: 2004 Guidance on the use of I.S. EN 12620 - Aggregates for concrete
I.S. EN 1085: 2007 Wastewater treatment vocabulary
External works Roof Plumbing External insulation Cavity wall insulation Underfloor heating Wall ties Underfloor heating pipes Air to water heat pump Air to air heat pump Air to ground heat pump Gas boiler Insulated concrete formwork Roof insulation Copper Time and temperature Zone control Drainage Sewer Manhole Septic tank Ground conditions Air tightness Air tightness tape Tongue and groove Building energy rating Energy performance certificate Water pump Water tank External wall insulation Roof lights External doors Wall tiles Mechanical ventilation Air tight membrane Water membrane Water vapour membrane Vapour control layer Light gauge steel Damp proof membrane Damp proof course Tile Tiles Floor tiles Solar pv PV Pitch Piling Fire stopping PI Planning permission Planning Plasterboard Employers liability PL Plugs Structurally insulated panels Solar panels Fireline board EL Electric showers Timber frame BER